Comprehensive 10-Point Safety Servicing & Coastal Tune-Up
A residential garage door completes over 1,500 open/close cycles every year. Under Sutherland Shire's coastal salt mist and high humidity, unserviced hardware suffers premature bearing wear, cable oxidation, and spring fatigue. Our 10-point service restores smooth, quiet, and safe operation.
What Our 10-Point Precision Service Covers
Every service is carried out by licensed technicians complying with Australian Safety Standard AS/NZS 60335-2-95.
Test balance; re-tension torsion or extension springs to ensure effortless manual and motor operation.
Check 7×19 aircraft cables for strand fraying, rust pitting, or drum wheel groove misalignment.
De-grime vertical and horizontal track channels; re-align track spacing to eliminate door friction.
Inspect steel and nylon roller wheels for bearing slop; replace seized or noisy wheels.
Conduct AS/NZS 60335 resistance test to ensure door reverses instantly upon contacting an obstruction.
Clean optical lenses, verify IR alignment, and test emergency reversal travel margins.
Eliminate slack in opener drive rails to prevent gear stripping and motor cog chatter.
Tighten all structural bolts, pivot pins, and bracket screws loosened by daily door vibrations.
Apply specialist food-grade silicone or organic lanolin to springs, bearings, and pivot hinges (tracks kept dry).
Test manual release handle and trolley disconnect to ensure you can open the door during blackouts.
Sutherland Shire Coastal Care Protocol
If your home is in Cronulla, Kurnell, Burraneer, Caringbah South, or Bundeena, airborne salt mist settles on steel panels every day. Follow these manufacturer-approved rules to protect your Colorbond warranty:
Rinse the front Colorbond curtain with clean garden hose water once a month. This washes off accumulated sea salts before they pit the paint finish.
Never spray WD-40, motor oil, or heavy grease inside vertical tracks. Grease mixes with coastal sand and airborne dust, creating a grinding paste that destroys rollers and rips Nylofelt strips.
Coat overhead torsion springs with an organic lanolin spray twice a year. Lanolin repels coastal moisture without attracting heavy dirt.